Skip to content

Pipes and Cisterns Practice Questions with Detailed Solutions – Level 1

Level 1 pipes and cisterns practice: MCQs on inlets, outlets, leaks and alternate-hour pipes, with written solutions for all and videos for most.

Start Test

Choose Normal practice or a Simulated test.

Questions, answer key and solutions.

Questions
50
Duration
60 min
Marks
50Negative marking
Attempts
100
Access
Free

Normal practice, or a Simulated test

Both use the same questions. Normal practice is untimed and needs no account: choose an option and the answer and solution appear at once. The Simulated test is the real computer-based format, with one 60-minute clock, a question palette and full screen, and your score, the key and the solutions arrive when you submit.

How the two modes differ
No account needed

Normal

Untimed

Every question on one page, loading as you scroll. Choose an option and see straight away whether it was right.

  • No timer. Nothing to start and nothing to submit. Stop whenever you like.
  • Answered as you choose. Tap an option and it is marked at once, with the correct answer shown.
  • Solutions in place. The explanation, and the video where one has been added, sit under the question.
  • Open to guests. Normal practice needs no sign-in.
Real exam conditions

Simulated

Timed CBT

The computer-based test format: one clock, a question palette, and a score the moment you submit.

  • A clock that does not pause. 60 minutes from the moment you begin, and the paper is submitted for you when it reaches zero.
  • Question palette. Answered, not answered and marked for review, section by section, as the real interface has it.
  • Full screen, proctored. The test takes over the screen; leaving it three times submits the paper.
  • Answers hidden until you submit. The key, the explanations and your score all arrive together at the end.

About this test

Pipes and Cisterns Level 1 Practice Quiz: Leaks, Inlets and Outlets

Pipes and Cisterns Level 1 is a free arithmetic practice set on filling and emptying tanks. Aptitude360 gives a written solution for every question and a video solution for most of them.

Problem types in this pipes and cisterns set

  • An inlet and an outlet pipe working together, including several outlets at once
  • Leaks that slow filling, and finding how long the leak takes to empty the tank
  • Pipes closed or turned off after some minutes, and extra taps opened partway
  • Pipes opened at different clock times or on alternate hours
  • Comparing pipe speeds, such as one pipe a few times faster than another
  • Pipes of different diameters running together
  • Flow given in litres or gallons per minute, booster pumps and bucket capacity problems

Key formulas for pipes and cisterns

  • Two inlets taking \( a \) and \( b \) hours: \( T=\dfrac{ab}{a+b} \)
  • Inlet \( x \) hours, outlet \( y \) hours, \( y>x \): \( T=\dfrac{xy}{y-x} \)
  • Fills in \( a \) hours alone, \( b \) with a leak: leak empties in \( \dfrac{ab}{b-a} \)
  • Net work per hour: \( \dfrac{1}{a}+\dfrac{1}{b}-\dfrac{1}{c} \)
  • Flow rate \( Q \) through a pipe of diameter \( d \) at equal flow velocity: \( Q\propto d^{2} \)

Who should start with this Level 1 set

It suits aspirants of competitive exams with an arithmetic section who are learning pipes and cisterns from the basics. Level 1 builds the rate-per-hour method before harder mixed problems.

FAQs about Pipes and Cisterns Practice Questions with Detailed Solutions – Level 1

What is the formula for pipes and cisterns?
In pipes and cisterns, a pipe that fills a tank in x hours fills 1/x of it per hour, and an outlet that empties it in y hours removes 1/y per hour, so with both open the net rate is 1/x − 1/y. The time to fill is the reciprocal of the net rate, which simplifies to xy/(y − x) hours when y is greater than x.
How do you solve pipes and cisterns questions with a leak?
A leak is treated as an emptying pipe: if a tap fills a tank in 8 hours but takes 12 hours with the leak, the leak's rate is 1/8 − 1/12 = 1/24, so the leak alone empties the full tank in 24 hours. Using the LCM of the times as the tank's capacity in units makes these calculations quicker.
Which exams ask pipes and cisterns questions?
Pipes and cisterns appear in the quantitative sections of Staff Selection Commission (SSC) exams such as CGL and CHSL, bank exams such as Institute of Banking Personnel Selection (IBPS) PO and Clerk, and occasionally in the Common Admission Test (CAT) as part of time and work. The topic uses the same rate logic as time and work, with emptying pipes counted as negative work.
How many questions are in Aptitude360's Pipes and Cisterns Level 1 practice set?
Aptitude360's Pipes and Cisterns Level 1 practice set has 50 questions with a 60-minute timer, at 1 mark each and 0.25 deducted per wrong answer, and 48 of them have video solutions. It is free and covers inlet and outlet pipes working together, leaks, extra taps opened halfway, tanks already three-quarters full, pipes of different diameters and finding clock times when the tank fills.

Test structure

How the paper is split, and how long each part runs. A section you have finished cannot be returned to.

SectionQuestionsTime
Pipes and Cisterns level - 15060 min

Marking & rules

Total marks
50 across 50 questions.
Negative marking
A wrong answer costs marks. Leaving a question unanswered costs nothing.
Attempts
100 in total. An attempt is spent the moment you begin one.

What you get when you submit

The analysis is ready the moment you submit the paper.

Score and accuracy

Marks, percentage, right, wrong and skipped, and the time you took.

Section by section

The same figures for each section, so a weak one cannot hide in an average.

The full answer key

Every question with your answer, the right one, the working, and the video where there is one.

Where you stand

Your score against the spread of everyone else who has sat this test.

Recommended courses for CAT & OMET

All CAT & OMET courses